...notes on manual tuning
As well as an automatic tuning procedure your HITACHI television also allows you to input broadcast frequencies through a number of different entry methods. Follow the steps below and choose one of the 4 entry methods to input broadcast frequencies.
VCR should be tuned into Programme 0.
Follow the steps below to tune in your VCR if it was not found during Autotune. See programme sort section to move to channel 0.
manual tuning procedure
1
Press the MENU button. The MAIN MENU appears.
2
Press the cursor DOWN button to select INSTALL.
3
Once highlighted, accept selection.
1 4 7
2 5 8 0
3 6 9
4
Press the cursor DOWN button to select MANUAL SETUP.
5
CLE-952A
Once highlighted, accept selection.
6 7
18
Use the cursor keys to move the selection bar over the programme frequency required to be adjusted. Once highlighted, accept the selection to change the frequency. The selection bar will turn blue. It is now ready to change.
